|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DVHV2800S Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVHV series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating. Unique to the DVHV series is a magnetic feedback circuit that is radiation immune. Operating at a nominal fixed frequency of 475 kHz, these regulated, isolated units utilize well controlled undervoltage lockout circuitry to eliminate slow start-up problems. The output voltage is trimmable up to +10% or down -20%. These converters are designed and manufactured in a facility qualified to ISO9001 and certified to MILPRF-38534 and MIL-STD-883. This product may incorporate one or more of the following U.S. patents: 5,784,266 5,790,389 5,963,438 5,999,433 6,005,780 6,084,792 6,118,673 FEATURES * * * * * * * * * * * * * * * * * * * High Reliability Very Low Output Noise Output Voltage Trim Up +10% or Down -20% Wide Input Voltage Range: 15 to 50 Volts per MIL-STD-704 Up to 15 Watts Output Power Radiation Immune Magnetic Feedback Circuit NO Use of Optoisolators Undervoltage Lockout Indefinite Short Circuit Protection Current Limit Protection Industry Standard Pinout High Input Transient Voltage: 80 Volts for 1 sec per MIL-STD-704A Radiation Hardened Version Available Precision Seam Seal or Solder Seal Hermetic Package Custom Versions Available Additional Environmental Screening Available Meets MIL-STD-461C and MIL-STD-461D EMC Requirements When Used With a DVMC28 EMI Filter Flanged and Non-flanged Versions Available. MIL-PRF-38534 Element Evaluated Components Figure 1 - DVHV2800S / DVHV2800SF DC-DC Converter (Not To Scale) 1X020DSF 11314 4th Avenue West, Suite 206 Everett, WA 98204 http://www.vpt-inc.com Sales Information: Phone: (425) 353-3010 Fax: (425) 353-4030 E-mail: vptsales@vpt-inc.com 1 DVHV2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 50 VDC 80 Volts 15 Watts 11 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHV283R3S Min 15 0 4 +15C -65C to +150C 270C (49 / 52) Grams Parameter STATIC INPUT 4 Voltage Current Ripple Current Inhibit Pin Input UVLO Turn On UVLO Turn Off OUTPUT Voltage Power 3 3 4 4 Conditions DVHV2805S Max 50 80 6 90 50 1.5 13.0 14.8 14.5 3.34 3.35 10 3.03 30 20 50 11 11 1000 550 600 - Typ 28 11.0 3.30 3.30 475 413 Min 15 0 9.0 12.0 11.0 4.95 4.925 0 0 73 400 500 100 - Typ 28 11.0 5.00 5.00 475 413 Max 50 80 6 90 50 1.5 13.0 14.8 14.5 5.05 5.075 15 3.0 30 20 50 11 11 1000 550 600 - Units Continuous Transient, 1 sec Inhibited No Load Full Load, 20Hz to 10MHz V V mA mA mAp-p V V V V V V W A mVp-p mV mV % W W F kHz kHz M kHrs Inhibit Pin Open Circuit Voltage 9.0 12.0 11.0 VOUT VOUT VOUT VOUT VOUT VOUT TCASE = 25C TCASE = -55C to +125C 3.26 3.25 0 0 Current Ripple Voltage Line Regulation Load Regulation EFFICIENCY Full Load, 20Hz to 10MHz VIN = 15V to 50V No Load to Full Load Overload 4 68 400 LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD 4 Short Circuit SWITCHING FREQUENCY SYNC FREQUENCY RANGE ISOLATION MTBF (MIL-HDBK-217F) VH - VL = 5V Duty Cycle = 20% - 80% 500 VDC AIF @ TC = 55C VOUT VOUT VOUT 500 100 - DYNAMIC Load Step Output Transient Load Step Recovery Line Step Recovery Turn On Delay Turn On Overshoot 2 4 Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V - 300 300 - 200 550 600 500 20 15 - 300 300 - 300 500 600 500 20 25 mVPK Sec mVPK Sec mSec mVPK Line Step Output Transient 2, 4 Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X020DSF 2 DVHV2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 50 VDC 80 Volts 15 Watts 11 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHV2812S Min 15 0 4 +15C -65C to +150C 270C (49 / 52) Grams Parameter STATIC INPUT 4 Voltage Current Ripple Current Inhibit Pin Input UVLO Turn On UVLO Turn Off OUTPUT Voltage Power 3 3 4 4 Conditions DVHV2815S Max 50 80 6 90 50 1.5 13.0 14.8 14.5 12.12 12.18 15 1.25 40 20 50 11 11 500 550 600 - Typ 28 11.0 12.0 12.0 475 413 Min 15 0 9.0 12.0 11.0 14.85 14.775 0 0 77 400 500 100 - Typ 28 11.0 15.0 15.0 475 413 Max 50 80 6 90 50 1.5 13.0 14.8 14.5 15.15 15.225 15 1.0 40 20 50 11 11 500 550 600 - Units Continuous Transient, 1 sec Inhibited No Load Full Load, 20Hz to 10MHz V V mA mA mAp-p V V V V V V W A mVp-p mV mV % W W F kHz KHz M kHrs Inhibit Pin Open Circuit Voltage 9.0 12.0 11.0 VOUT VOUT VOUT VOUT VOUT VOUT TCASE = 25C TCASE = -55C to +125C 11.88 11.82 0 0 Current Ripple Voltage Line Regulation Load Regulation EFFICIENCY Full Load, 20Hz to 10MHz VIN = 15V to 50V No Load to Full Load Overload 4 77 400 LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD 4 Short Circuit SWITCHING FREQUENCY SYNC FREQUENCY RANGE ISOLATION MTBF (MIL-HDBK-217F) VH - VL = 5V Duty Cycle = 20% - 80% 500 VDC AIF @ TC = 55C VOUT VOUT VOUT 500 100 - DYNAMIC Load Step Output Transient Load Step Recovery Line Step Recovery Turn On Delay Turn On Overshoot 2 4 Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V - 500 300 - 300 550 900 500 20 50 - 500 300 - 350 450 900 500 20 50 mVPK Sec mVPK Sec mSec mVPK Line Step Output Transient 2, 4 Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X020DSF 3 DVHV2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) 50 VDC 80 Volts 15 Watts 11 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHV285R2S Min 15 0 4 +15C -65C to +150C 270C (49 / 52) Grams Parameter STATIC INPUT 4 Voltage Current Ripple Current Inhibit Pin Input UVLO Turn On UVLO Turn Off OUTPUT Voltage Power 3 3 4 4 Conditions Typ 28 11.0 5.20 5.20 475 413 Max 50 80 6 90 50 1.5 13.0 14.8 14.5 5.252 5.278 15 3.0 30 20 50 11 11 1000 550 600 - Units Continuous Transient, 1 sec Inhibited No Load Full Load, 20Hz to 10MHz V V mA mA mAp-p V V V V V V W A mVp-p mV mV % W W F kHz kHz M kHrs Inhibit Pin Open Circuit Voltage 9.0 12.0 11.0 VOUT VOUT VOUT VOUT VOUT VOUT TCASE = 25C TCASE = -55C to +125C 5.148 5.122 0 0 Current Ripple Voltage Line Regulation Load Regulation EFFICIENCY Full Load, 20Hz to 10MHz VIN = 15V to 50V No Load to Full Load Overload 4 73 400 LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD 4 Short Circuit SWITCHING FREQUENCY SYNC FREQUENCY RANGE ISOLATION MTBF (MIL-HDBK-217F) VH - VL = 5V Duty Cycle = 20% - 80% 500 VDC AIF @ TC = 55C VOUT VOUT VOUT 500 100 - DYNAMIC Load Step Output Transient Load Step Recovery Line Step Recovery Turn On Delay Turn On Overshoot 2 4 Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V - 300 300 - 300 500 600 500 20 25 mVPK Sec mVPK Sec mSec mVPK Line Step Output Transient 2, 4 Notes: 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 1X020DSF 4 DVHV2800S Series BLOCK DIAGRAM PIN 1 28V IN L1 C1 IN COM PIN 10 Q1 MAGNETIC FEEDBACK VOLTAGE AND CURRENT AMPLIFIERS TRIM PIN 3 C2 Rs2 OUT COM PIN 4 T1 D1 PIN 5 +V OUT UNDER VOLTAGE SHUTDOWN Rs1 PRIMARY HOUSEKEEPING SUPPLY INH PIN 2 SYNC PIN 9 PWM CONTROL SECONDARY HOUSEKEEPING SUPPLY Figure 2 CONNECTION DIAGRAM 1 28V IN 9 SYNC 28 Vdc +V OUT 5 + - 2 INH 10 IN COM OUT COM 4 LOAD Figure 3 1X020DSF 5 DVHV2800S Series INHIBIT DRIVE CONNECTION DIAGRAMS Figure 4 - Internal Inhibit Circuit and Recommended Drive (Shown with optional capacitor for turn-on delay) Figure 5 - Isolated Inhibit Drive (Shown with optional capacitor for turn-on delay) EMI FILTER HOOKUP DIAGRAM DVMC28 EMI FILTER 1 28V IN 28V OUT 9 SYNC 28 Vdc 2 1 28V IN +V OUT DVHV2800S DC-DC CONVERTER 5 + - 2 INH 4 LOAD 5 IN COM OUT COM 3 4 10 IN COM OUT COM 6, 7, 8 CASE Figure 6 - Converter with EMI Filter 1X020DSF 6 DVHV2800S Series PARALLEL CONNECTION DIAGRAM DVMC28 EMI FILTER 1 28V IN 28V OUT 2 1 9 DVHV2800S DC-DC CONVERTER 28V IN SYNC +V OUT 5 28 Vdc + - 2 INH 5 4 10 LOAD IN COM 3 OUT COM IN COM OUT COM 4 6, 7, 8 CASE CASE 1 9 DVHV2800S DC-DC CONVERTER 5 28V IN +V OUT SYNC 2 INH 10 IN COM OUT COM 4 6, 7, 8 CASE Figure 7 1X020DSF 7 DVHV2800S Series OUTPUT VOLTAGE TRIM The output voltage can be trimmed down by connecting a resistor between the TRIM pin (PIN 3) and the +V OUT pin (PIN 5), or can be trimmed up by connecting a resistor between the TRIM pin (PIN 3) and the OUT COM pin (PIN 4). The maximum trim range is +10% up and -20% down. The appropriate resistor values versus the output voltage are given in the trim table below. Figure 8 - Output Voltage Trim DVHV283R3S +VOUT (V) 3.75 3.70 3.65 3.60 3.55 3.50 3.45 3.40 3.35 3.30 3.25 3.20 3.15 3.10 RTRIM () 25.4k 32.5k 41.8k 54.2k 71.6k 98.2k 143.2k 236k 543k 102k 34.8k 10.5k 0 DVHV2805S +VOUT (V) 5.5 5.4 5.3 5.2 5.1 5.0 4.9 4.8 4.7 4.6 4.5 4.4 RTRIM () 19k 31.5k 52.3k 94k 219k 209k 84k 42.3k 21.5k 9k 0 DVHV285R2S +VOUT (V) 5.7 5.6 5.5 5.4 5.3 5.2 5.1 5.0 4.9 4.8 4.7 4.6 RTRIM () 23k 36.5k 59k 104k 239k 249.8k 104k 55.4k 31.1k 16.5k 6.8k DVHV2812S +VOUT (V) 13.2 13.0 12.8 12.6 12.4 12.2 12.0 11.8 11.6 11.4 11.2 11.0 10.8 10.6 10.4 10.2 10.0 9.8 9.6 9.4 9.2 9.0 RTRIM () 5.93k 10.1k 16.5k 27.1k 48.4k 113.7k 437k 209k 132k 93k 69.5k 53.8k 42.6k 34.2k 27.6k 22.4k 18.1k 14.5k 11.5k 8.88k 6.63k DVHV2815S +VOUT (V) 16.75 16.50 16.25 16.00 15.75 15.50 15.25 15.00 14.75 14.50 14.25 14.00 13.75 13.50 13.25 13.00 12.75 12.50 12.25 12.00 RTRIM () 0 1.67k 5k 10k 18.3k 35k 85k 475k 225k 142k 100k 75k 58.3k 46.4k 37.5k 30.6k 25k 20.5k 16.7k 1X020DSF 8 DVHV2800S Series EFFICIENCY PERFORMANCE CURVES (TCASE = 25C, Full Load, Unless Otherwise Specified) VIN = 16V VIN = 28V VIN = 40V 75 70 80 75 65 Efficiency (%) 60 55 Efficiency (%) 70 65 60 50 45 3 4 5 6 7 8 9 10 Output Power (W) 55 50 3 6 9 Output Pow er (W) 12 15 Figure 9 - DVHV283R3S Efficiency (%) vs. Output Power (W) Figure 10 - DVHV2805S / DVHV285R2S Efficiency (%) vs. Output Power (W) 85 85 80 80 75 Efficiency (%) Efficiency (%) 75 70 70 65 65 60 3 6 9 Output Pow er (W) 12 15 60 3 6 9 Output Power (W) 12 15 Figure 11 - DVHV2812S Efficiency (%) vs. Output Power (W) Figure 12 - DVHV2815S Efficiency (%) vs. Output Power (W) 1X020DSF 9 DVHV2800S Series EMI PERFORMANCE CURVES (TCASE = 25C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) Figure 13 - DVHV2800S without EMI Filter Figure 14 - DVHV2800S with EMI Filter 1X020DSF 10 DVHV2800S Series PACKAGE SPECIFICATIONS (NON-FLANGED, SOLDER SEAL) TOP VIEW SIDE VIEW PIN 1 2 3 4 5 6 7 8 9 10 BOTTOM VIEW FUNCTION 28V IN INHIBIT TRIM OUT COM +V OUT CASE CASE CASE SYNC IN COM Figure 15 - Non-Flanged, Solder Seal Tin Plated Package and Pinout (Not Used for /HB or Higher Screened Products) (Dimensional Limits are 0.005" Unless Otherwise Stated) 1X020DSF 11 DVHV2800S Series PACKAGE SPECIFICATIONS (NON-FLANGED, SEAM SEAL) TOP VIEW SIDE VIEW PIN 1 2 3 4 5 6 7 8 9 10 BOTTOM VIEW FUNCTION 28V IN INHIBIT TRIM OUT COM +V OUT CASE CASE CASE SYNC IN COM Figure 16 - Non-Flanged, Seam Seal Package and Pinout (Dimensional Limits are 0.005" Unless Otherwise Stated) 1X020DSF 12 DVHV2800S Series PACKAGE SPECIFICATIONS (FLANGED, SOLDER SEAL) TOP VIEW SIDE VIEW PIN 1 2 3 4 5 6 7 8 9 10 BOTTOM VIEW FUNCTION 28V IN INHIBIT TRIM OUT COM +V OUT CASE CASE CASE SYNC IN COM Figure 17 - Flanged, Solder Seal Tin Plated Package and Pinout (Not Used for /HB or Higher Screened Products) (Dimensional Limits are 0.005" Unless Otherwise Stated) 1X020DSF 13 DVHV2800S Series PACKAGE SPECIFICATIONS (FLANGED, SEAM SEAL) TOP VIEW SIDE VIEW PIN 1 2 3 4 5 6 7 8 9 10 BOTTOM VIEW FUNCTION 28V IN INHIBIT TRIM OUT COM +V OUT CASE CASE CASE SYNC IN COM Figure 18 - Flanged, Seam Seal Package and Pinout (Dimensional Limits are 0.005" Unless Otherwise Stated) 1X020DSF 14 DVHV2800S Series PACKAGE PIN DESCRIPTION Pin 1 2 3 4 5 6 7 8 9 10 Function 28V IN INHIBIT TRIM OUT COM +V OUT CASE CASE CASE SYNC IN COM Description Positive Input Voltage Connection Logic Low = Disabled Output. Connecting the inhibit pin to input common causes converter shutdown. Logic High = Enabled Output. Unconnected or open collector TTL. Trim Output Voltage to +10%, -20% of Nominal Value Output Common Connection Positive Output Voltage Connection Case Connection Case Connection Case Connection Synchronization Signal Input Common Connection 1X020DSF 15 DVHV2800S Series ENVIRONMENTAL SCREENING (Per MIL-STD-883 as referenced to MIL-PRF-38534, Class H) Extended /ES * * HB /HB * * * * Class H /H * * * * Class K /K * * * * * * * Screening NonDestructive Bond Pull Internal Visual Temperature Cycling Constant Acceleration PIND Pre Burn-In Electrical MIL-STD-883 Standard (No Suffix) Method 2023 Method 2017, 2032 Internal Procedure Method 1010, Condition C Method 1010, -55C to 125C Method 2001, 3000g, Y1 Direction Method 2001, 500g, Y1 Direction Method 2020, Condition A2 100% at 25C Method 1015, 320 hours at +125C Method 1015, 160 hours at +125C 96 hours at +125C 24 hours at +125C MIL-PRF-38534, Group A1 100% at 25C Method 1014, Fine Leak, Condition A Method 1014, Gross Leak, Condition C -3 Dip (1 x 10 ) Method 20123 Method 2009 * * * * Burn-In * * * * * Final Electrical * * * * * * Hermeticity * * * * * * * Radiography External Visual Notes: 1. 2. 3. * * * * * * 100% R&R testing at -55C, +25C, and +125C with all test data included in product shipment. PIND test Certificate of Compliance included in product shipment. Radiographic test Certificate of Compliance and film(s) included in product shipment. 1X020DSF 16 DVHV2800S Series ORDERING INFORMATION DVHV 1 28 2 05 3 S 4 F 5 R 6 /HB 7 - XXX 8 (1) Product Series DVHV (2) Nominal Input Voltage 28 28 Volts (3) Output Voltage 3R3 05 5R2 12 15 3.3 Volts 5 Volts 5.2 Volts 12 Volts 15 Volts (4) Number of Outputs S Single (5) Package Option None F Non-Flanged Flanged (6) Rad-Hard Option2 None R Standard 100 kRad (7) Screening Code1,3 None /ES /HB /H /K Standard Extended HB Class H Class K (8) Additional Screening Code Contact Sales Notes: 1. 2. 3. Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products. VPT Inc. is not currently qualified to a DSCC certified radiation hardness assurance program. VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer contract. Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental screening and testing, different input voltage, output voltage, power requirement, source inspection, and/or special element evaluation for space or other higher quality applications. 1X020DSF 17 DVHV2800S Series SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS Standard Microcircuit Drawing (SMD) *T.B.D. *T.B.D. *T.B.D. *T.B.D. *T.B.D. DVHV2800S Series Similar Part Number DVHV283R3S/H DVHV283R3SF/H DVHV2805S/H DVHV2805SF/H DVHV285R2S/H DVHV285R2SF/H DVHV2812S/H DVHV2812SF/H DVHV2815S/H DVHV2815SF/H Do not use the DVHV2800S Series similar part number for SMD product acquisition. It is listed for reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD's can be downloaded from the DSCC website at http://www.dscc.dla.mil/programs/smcr/. The SMD number listed above is for MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA (Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead finishes, and radiation levels. CONTACT INFORMATION To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales Department at: Phone: Fax: E-mail: (425) 353-3010 (425) 353-4030 vptsales@vpt-inc.com All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors or omissions. The products or specifications contained herein are subject to change without notice. 1X020DSF 18 |
Price & Availability of DVHV2800S |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |